Labnet's 311 and 611 High Performance Incubators feature a broad temperature range and a digital microprocessor for precise control.

Incubator temperature is set and displayed digitally. Temperature is easliy set using the membrane keypad. The chamber is jacketed in warm air from all sides, including the door. Heating can be set to gravity convection, or for more rapid temperature change and better uniformity, mechanical convection. An independent safety thermostat protects the incubator and its contents in the event of a primary controller failure. All electronics are located away from the chamber, protected from heat related stress by a cooling fan.

Upon opening the outer door, the stainless steel chamber is illuminated. An inner glass door allows for easy visualization of samples. Small equipment, such as rockers and shakers, can be powered by the interior electrical outlet. Each incubator is supplied with two adjustable stainless steel shelves.

311D
Chamber volume: 2.75 cu. ft.
Temperature range Ambient: +5? to 95?C
Temperature uniformity: 37/56C/90C 0.2C/0.5C/0.75C
Temperature accuracy: 0.2C
Temp. display to 0.1C
Dimensions: (W x D x H) Chamber 17 x 14 x 20 inches/43.2 x 35.6 x 51 cm
Exterior: 27 x 20 x 29 inches/68.6 x 51 x 73.7 cm
Weight: 140 lb/63.6 kg
Electrical: 120V~, 60 Hz

611D
Chamber volume: 6.0 cu. ft.
Temperature range: Ambient +5 to 95C
Temperature uniformity: @37/56C/90C 0.25C/0.6C/0.9C
Temperature accuracy: 0.2C
Temp. display: to 0.1C
Dimensions: (W x D x H) Chamber 21 x 20 x 25 inches/53.3 x 51 x 63.5 cm
Exterior: 31 x 26 x 34 inches/78.7 x 66 x 86.4 cm
Weight: 185 lb/84 kg
Electrical: 120V~, 60 Hz