• Wide speed range—from 250rpm to 13,500rpm
• Angle and swing out rotors accommodate nearly every size tube and bottle from 0.2ml to 500ml
• Automatic rotor recognition system limits rotors to their rated maximum speed
• Imbalance sensor with safety shutdown
• Last run stored in memory—simply press start to repeat
• Quiet, maintenance-free induction drive
• Large, easy-to-read digital displays
• Electronic lid lock
• Microprocessor controlled
• User friendly, hybrid control panel with easy-to-use knobs and digital displays
• Selectable rates of acceleration and deceleration
• G-force conversion program
• Quick spin button for short runs with display of elapsed time
• 2-year warranty

*Holds 2 PCR Plates
*2500rpm
*500xg
*Accepts Standard and Skirted Plates
*Improves PCR Yield
*Fixed Vertically

· Eight Position Microtube rotor
· Storage compartment for PCR rotor
· Near silent operation
· Starts and stops in seconds
· PCR Strip Tube Rotor included

• Low-profile design
• LCD panel to show operating parameters
• Maximum speed of 15,000 rpm/ 21,200 x g
• “Dual-Flow” air cooling system, keeps samples and the rotor close to ambient temperature

Spectrafuge Mini Centrifuge with 1.5/2.0 ml rotor, strip tube rotor, 0.5 and 0.4 ml dapters

• Accurate and precise digital control
• Choose rpm or RCF
• Complete with newly designed, 24-place solid aluminum rotor
• Brushless, induction drive motor
• High maximum speed
• Compact design and small footprint
• Competitively priced
• Choice of 5 colors
• 1-year warranty

• Brushless motor...maintenance-free
• Exceptionally small footprint
• High maximum speed (14,000rpm/16,000 x g)
• Extremely quiet operation
• Cold room compatible
• Unique airflow pattern—samples stay cool
• Complete with rotor (18 x 1.5/2.0ml)
• StripSpin Adapter for PCR strips or 16 individual 0.2ml tubes
• 1-year warranty

• "Quick-COOL" function cools the rotor to 4°C in 8 min.
• Powerful motor drive runs samples as high as 17,135 x g
• Accelerates to max. speed in under 16 sec. (deceleration: 18 sec.)
• Solid aluminum rotor (24 x 1.5/2.0ml) with easy access design
• User-friendly control with large LCD display
• Imbalance identification system with automatic shut-off
• Quiet operation, less than 56 dBA at maximum speed
• Powerful refrigeration-temperature control from -10°C to 40°C
• Maintains 4°C at maximum speed (13,500rpm/17,135 x g)
• 0.5 to 99 minute timed, continuous, or Quick Spin modes
• Set and view speed in rpm of rcf
• Brushless motor for maintenance free operation
• Extremely compact (WxDxH) 10.9"x17"x9.75" /44lbs
• 2-year warranty

Vibration free design

The unique design of the 24-place rotor allows easy access to the tops of sample tubes. Individual tube slots in the solid aluminum rotor support the tubes along their length and contain sample in the event of tube failure. The rotor accepts 1.5/2.0ml tubes directly and smaller tubes through the use of adapters, sold separately.

*High speed - up to 15,000rpm/21,380 x g
*Whisper quiet brushless induction drive
*Precise, microprocessor control
*Automatic g-force conversion program
*Unmatched Capacity, 44 x 1.5ml

*Maximum speed 13,500rpm/17,310 x g
*Automatic rotor identification and g-force conversion
*Powerful refrigeration system (Z300-K only)
*Microprocessor control

✔ High performance and capacity
✔ Complete with 44 place rotor
✔ Maximum 15,000rpm/21,380 x g
-13,500rpm/17,720 x g in 44 place rotor

Advantages
• Speed is selectable in 10rpm and 500rpm increments.
• Time may be set from 1 to 60 min. or “continuous.”
• Time remaining to complete a run is also displayed.
• Radius correction feature allows g-value calculation with compensation for varying tube size and adapters.
• Braking power can be adjusted to any of ten available intensity levels.
• Displays actual and selected sample temperature
• Quick button for short runs with corresponding digital display of elapsed time in seconds
• Automatic “precool” program
• Automatic rotor recognition
• Program memory to store 10 complete centrifuge runs
• 2-year warranty

Advantages
• Speed is selectable in 10rpm and 500rpm increments.
• Time may be set from 1 to 60 min. or “continuous.”
• Time remaining to complete a run is also displayed.
• Radius correction feature allows g-value calculation with compensation for varying tube size and adapters.
• Braking power can be adjusted to any of ten available intensity levels.
• Displays actual and selected sample temperature
• Quick button for short runs with corresponding digital display of elapsed time in seconds
• Automatic “precool” program
• Automatic rotor recognition
• Program memory to store 10 complete centrifuge runs
• 2-year warranty