The Z233M2 is air cooled and features a user-friendly, microprocessor-based control panel. Run parameters are set using easy-to-turn knobs while the values are shown on digital displays. During a run, the display can be switched between preset and actual values at the touch of a button. Speed is selectable in 10rpm increments. The quick button activates a momentary spin. Time may be set from 1 to 60 minutes or “continuous.” Time remaining to complete a run is also displayed and two deceleration and acceleration steps, “fast” and “slow,” are featured. Speed display is selectable between RCF and rpm at anytime, even during a run. Both the Z233M2 and Z233MK2 have a maximum speed of 15,000rpm (21,380 x g). The maintenance-free induction drive on both units reduces operating noise to a whisper. Measured values are below 60dB, even at 15,000rpm. The Z233M2 is supplied without a rotor, however, rotors are available by clicking on the links below.

2-year warranty

ROTORS:

44 x 1.5mL Angle Rotor for the Z233 M-2 Centrifuge

24 x 1.5mL Angle Rotor for the z233 M-2 Centrifuge

18 x 1.5mL Angle Rotor for the Z233 M-2 Centrifuge

48 Place Angle Rotor: 24 x 1.5mL and 24 x 0.5mL Tubes

Swing out rotor, 12 x 1.5 ml Microcentrifuge Tubes