Search results

MTC Bio’s new 5mL Five-O™ tubes take all of the conveniences of standard 1.5mL tubes and scales them up for larger volume and (read more)

MTC Bio’s new 5mL Five-O™ tubes take all of the conveniences of standard 1.5mL tubes and scales them up for larger volume and throughput. These screw Cap Tubes are supplied with 20mm (OD) caps that seal smoothly and completely with a single 360° turn. Useful from -86°C to 110°C, they are a valuable resource for boiling and for sample preservation at very low temperatures. Choose from non-sterile bulk packaging with separate caps or gamma sterilized rack packaging. The foam racks are similar to the packaging normally associated with 15mL tubes (upright with caps attached), but they require about 60% less storage space. The 16mm tube diameter is identical to the diameter of standard 15ml tubes, which ensures further compatibility with centrifuge rotors, etc. In many applications, these tubes have replaced 15ml tubes, dramatically reducing plastic waste, storage space and shipping costs. The potential contamination of pipettor shafts is greatly reduced because the 56mm total tube length (vs. 120mm for standard 15ml tubes) is short enough for standard 1ml or 5ml tips to reach the tube’s conical bottom. The tubes are made of maximum clarity, low-binding virgin polypropylene and are certified RNase & DNase free. Sterile tubes are also pyrogen free. They are sized to be compatible with all Benchmark™ (USA) and standard German-designed equipment, including centrifuges, dry bath block heaters, tube racks and thermal shakers/vortexers (hide)

*Very small, efficient stirring bars *Ideal for vials, micro test tubes, centrifuge tube mixing *Teflon® PTFE coated *ALNICO (read more)

*Very small, efficient stirring bars
*Ideal for vials, micro test tubes, centrifuge tube mixing
*Teflon® PTFE coated
*ALNICO V coated magnet (hide)

Compatible with FACS (BD) instruments Available with 35µm strainer cap, standard cap, or no cap Clear polystyrene 5mL (read more)

• Compatible with FACS (BD) instruments
• Available with 35µm strainer cap, standard cap, or no cap
• Clear polystyrene
• 5mL capacity

(hide)

• Thin and Strong Nitrile – Sensitivity you can trust • Accelerator-Free – No dithiocarbamates, thiurams or mercaptobenzothiazoles (read more)

• Thin and Strong Nitrile – Sensitivity you can trust
• Accelerator-Free – No dithiocarbamates, thiurams or mercaptobenzothiazoles (MBT)
• Anti-Slip SUPER Grip Compound – Exceptional wet and dry grip
• Latex-Free – Reduces risk of latex sensitization
• Chemotherapy Drug Permeation Tested – Safe for use with chemotherapy drugs
• Textured Fingertips – Enhanced Tactile Sensitivity
• Powder free, 240mm (9"), textured
• 100 pcs/box, 10 boxes/case (hide)

Ensure High Cell Survivability with a Uniform, Controlled and Reproducible Gradual Cooling Rate.Thermal-conductive alloy and (read more)

Ensure High Cell Survivability with a Uniform, Controlled and Reproducible Gradual Cooling Rate.

• Thermal-conductive alloy and advanced insulation controls the heat removal rate, providing uniform cryopreservation
• Reusable without any alcohol or fluids required
• Easy to handle, not cold to touch when removed from -80°C freezer
• Freeze individual experiment or full load. Cooling rate of each sample is the same every time
• Standardized, repeatable, dependable results
• Minimal footprint requires little freezer space
• No ice required, zero consumables
• No pre-cooling wait time

(hide)

*Single ply wipe that is low linting, very absorbent, soft and will not scratch *100% recycled cellulose (at least 80% post consumer!) *240 (read more)

*Single ply wipe that is low linting, very absorbent, soft and will not scratch
*100% recycled cellulose (at least 80% post consumer!)
*240 sheets/box (box is made from recycled materials and is biodegradable)

(hide)

The Sanuvox Green Clean S300-G2 unit combines the synergistic capabilities of high-intensity UVC, carbon and HEPA filtration to capture (read more)

The Sanuvox Green Clean S300-G2 unit combines the synergistic capabilities of high-intensity UVC, carbon and HEPA filtration to capture and kill harmful biological and chemical contaminants found within a Cannabis grow facility. Contaminants such as Powdery Mildew, Botrytis, molds, bacteria and associated odors are all disinfected or eliminated with the use of the GC S300-G2 model.

Engineered for rooms up to 6,500 cubic feet with no HVAC system, the GC S300-G2 unit continually recirculates and disinfects the air at a minimum of 6 to 8 times per hour. It is designed to be a self-operating unit that can be mounted onto a ceiling or a wall.

(hide)

• Reduces chances for accidents • Clearly labeled, dedicated containers available in 2 sizes: floor model: 18kg (40lb) of waste; (read more)

• Reduces chances for accidents
• Clearly labeled, dedicated containers available in 2 sizes: floor model: 18kg (40lb) of waste; bench top: 5.5kg (12lb)
• Lined with a 2 mil, clear polypropylene bag to store broken glass fragments and leaked liquids
• Printed in four languages: English, German, French, Spanish (hide)

• Made from silicone • Oversized surface for secure grip • Can withstand temperatures from –70° to 500°F (–57° to (read more)

• Made from silicone
• Oversized surface for secure grip
• Can withstand temperatures from –70° to 500°F (–57° to 260°C) (hide)